Info: 'This version of SoftPC will run on the Macintosh Classic, LC, SE, Portable, and the Plus. You need SoftPC for the SE/30 and Mac II Family.'
3:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
DITL_209_Memory Short.txt
Items: (4 entries)
0:
Bounds: x1=215, y1=155, x2=295, y2=175
Type: 4
Info: 'OK'
1:
Bounds: x1=61, y1=10, x2=295, y2=29
Type: -120
Info: 'You are nearly out of memory!'
2:
Bounds: x1=61, y1=32, x2=302, y2=145
Type: -120
Info: 'To avoid a possible crash, Save your work and Quit SoftPC as soon as possible.To increase the amount of memory available to SoftPC, you might try turning off the RAM Cache or removing some INITs or CDEVs.'
3:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
DITL_208_Bad Floppy.txt
Items: (2 entries)
0:
Bounds: x1=254, y1=75, x2=334, y2=95
Type: 4
Info: 'Eject'
1:
Bounds: x1=74, y1=10, x2=339, y2=64
Type: 8
Info: 'This diskette is not an MS-DOS diskette. Use AccessPC® from Insignia Solutions or AFX to initialize MS-DOS diskettes.'
DITL_207_Memory Full.txt
Items: (4 entries)
0:
Bounds: x1=148, y1=107, x2=273, y2=127
Type: 4
Info: 'Return To Finder'
1:
Bounds: x1=57, y1=10, x2=257, y2=26
Type: -120
Info: 'Can’t get enough RAM to run!'
2:
Bounds: x1=57, y1=30, x2=279, y2=98
Type: -120
Info: 'There isn’t enough available memory to run SoftPC. You might try turning off the RAM Cache or removing some INITs, CDEVs, etc.'
3:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
DITL_206_No Memory.txt
Items: (4 entries)
0:
Bounds: x1=167, y1=106, x2=287, y2=126
Type: 4
Info: 'Return to Finder'
1:
Bounds: x1=60, y1=10, x2=250, y2=26
Type: -120
Info: 'Not Enough Available RAM!'
2:
Bounds: x1=60, y1=30, x2=289, y2=97
Type: -120
Info: 'Try turning off the RAM Cache or removing some unnecessary INIT and CDEV files from your System Folder, then Restart your Mac.'
3:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
DITL_205_no postscript.txt
Items: (6 entries)
0:
Bounds: x1=262, y1=188, x2=332, y2=208
Type: 4
Info: 'Cancel'
1:
Bounds: x1=262, y1=158, x2=332, y2=178
Type: 4
Info: 'Continue'
2:
Bounds: x1=63, y1=16, x2=277, y2=35
Type: -120
Info: 'CAUTION: No Postscript Printer!'
3:
Bounds: x1=21, y1=50, x2=330, y2=148
Type: -120
Info: 'Output direct to a Postscript printer has been requested and no Postscript printer is available. This Print request should be cancelled and an available PostScript printer selected in the Chooser, or the Print Option should be reset to Epson™ FX-80.'
4:
Bounds: x1=21, y1=160, x2=256, y2=180
Type: 8
Info: 'Continue — I’ll take my chances.'
5:
Bounds: x1=21, y1=190, x2=256, y2=210
Type: 8
Info: 'Cancel this print request.'
DITL_204_print pending alert.txt
Items: (6 entries)
0:
Bounds: x1=262, y1=89, x2=332, y2=109
Type: 4
Info: 'Print'
1:
Bounds: x1=262, y1=120, x2=332, y2=140
Type: 4
Info: 'Discard'
2:
Bounds: x1=63, y1=16, x2=283, y2=36
Type: -120
Info: 'CAUTION: Printouts will be lost!'
3:
Bounds: x1=12, y1=50, x2=336, y2=82
Type: -120
Info: 'One or more Printouts have been requested — do you want to print them now, or discard them?'
4:
Bounds: x1=12, y1=91, x2=224, y2=110
Type: -120
Info: 'Print remaining printouts now.'
5:
Bounds: x1=12, y1=122, x2=206, y2=141
Type: -120
Info: 'Discard remaining printouts.'
DITL_203_print delete alert.txt
Items: (6 entries)
0:
Bounds: x1=262, y1=120, x2=332, y2=140
Type: 4
Info: 'Cancel'
1:
Bounds: x1=262, y1=89, x2=332, y2=109
Type: 4
Info: 'Discard'
2:
Bounds: x1=63, y1=16, x2=285, y2=36
Type: -120
Info: 'CAUTION: Printouts will be lost!'
3:
Bounds: x1=16, y1=50, x2=332, y2=82
Type: -120
Info: 'This will discard any previously requested printouts.'
4:
Bounds: x1=16, y1=91, x2=229, y2=110
Type: -120
Info: 'Discard remaining printouts.'
5:
Bounds: x1=17, y1=122, x2=258, y2=141
Type: -120
Info: 'Cancel — don’t discard printouts.'
DITL_202_quit alert.txt
Items: (6 entries)
0:
Bounds: x1=262, y1=119, x2=332, y2=139
Type: 4
Info: 'Cancel'
1:
Bounds: x1=262, y1=89, x2=332, y2=109
Type: 4
Info: 'Quit'
2:
Bounds: x1=63, y1=16, x2=263, y2=36
Type: -120
Info: 'CAUTION: Work could be lost!'
3:
Bounds: x1=16, y1=50, x2=332, y2=86
Type: -120
Info: 'Quitting SoftPC will cause any unsaved work in a PC application to be lost.'
Info: 'The change you have made cannot take effect until SoftPC has been ‘reset’. This will cause any unsaved work in a PC application to be lost.'
4:
Bounds: x1=20, y1=114, x2=256, y2=133
Type: -120
Info: 'Reset — no files need to be saved.'
5:
Bounds: x1=20, y1=143, x2=256, y2=162
Type: -120
Info: 'Cancel — files need to be saved.'
DITL_200_reset alert.txt
Items: (6 entries)
0:
Bounds: x1=262, y1=119, x2=332, y2=139
Type: 4
Info: 'Cancel'
1:
Bounds: x1=262, y1=89, x2=332, y2=109
Type: 4
Info: 'Reset'
2:
Bounds: x1=63, y1=16, x2=263, y2=36
Type: -120
Info: 'CAUTION: Work could be lost!'
3:
Bounds: x1=12, y1=50, x2=332, y2=86
Type: -120
Info: 'Resetting the SoftPC will cause any unsaved work in a PC application to be lost.'
4:
Bounds: x1=12, y1=91, x2=256, y2=110
Type: -120
Info: 'Reset — no files need to be saved.'
5:
Bounds: x1=12, y1=121, x2=256, y2=140
Type: -120
Info: 'Cancel — files need to be saved.'
DITL_172_print cancel.txt
Items: (1 entries)
0:
Bounds: x1=12, y1=16, x2=290, y2=52
Type: -120
Info: ' To Cancel Printing Press “–.”.(Hold down the key and type a period.)'
DITL_171_setup.txt
Items: (7 entries)
0:
Bounds: x1=10, y1=7, x2=42, y2=39
Type: -96
Info: ' '
1:
Bounds: x1=136, y1=15, x2=286, y2=35
Type: -120
Info: 'SoftPC Setup Problem'
2:
Bounds: x1=9, y1=43, x2=387, y2=77
Type: -120
Info: ''
3:
Bounds: x1=9, y1=79, x2=387, y2=113
Type: -120
Info: ''
4:
Bounds: x1=9, y1=116, x2=387, y2=150
Type: -120
Info: ''
5:
Bounds: x1=9, y1=153, x2=387, y2=187
Type: -120
Info: ''
6:
Bounds: x1=9, y1=190, x2=387, y2=224
Type: -120
Info: ''
DITL_170_error.txt
Items: (6 entries)
0:
Bounds: x1=253, y1=100, x2=323, y2=120
Type: 4
Info: 'Quit'
1:
Bounds: x1=253, y1=60, x2=323, y2=80
Type: 4
Info: 'Reset'
2:
Bounds: x1=253, y1=20, x2=323, y2=40
Type: 4
Info: 'Continue'
3:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
4:
Bounds: x1=60, y1=20, x2=210, y2=40
Type: -120
Info: 'Unable To Proceed…'
5:
Bounds: x1=10, y1=50, x2=240, y2=130
Type: -120
Info: '^0^1'
DITL_161_hdisk getCfile.txt
Items: (14 entries)
0:
Bounds: x1=256, y1=139, x2=336, y2=157
Type: 4
Info: 'Select'
1:
Bounds: x1=427, y1=150, x2=507, y2=168
Type: 4
Info: ''
2:
Bounds: x1=256, y1=165, x2=336, y2=183
Type: 4
Info: 'Cancel'
3:
Bounds: x1=246, y1=28, x2=346, y2=48
Type: -128
Info: ''
4:
Bounds: x1=256, y1=60, x2=336, y2=78
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=87, x2=336, y2=105
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=28, x2=230, y2=158
Type: 0
Info: ''
7:
Bounds: x1=229, y1=28, x2=245, y2=158
Type: 0
Info: ''
8:
Bounds: x1=253, y1=121, x2=341, y2=122
Type: -128
Info: ''
9:
Bounds: x1=500, y1=40, x2=600, y2=80
Type: -120
Info: ''
10:
Bounds: x1=427, y1=174, x2=507, y2=192
Type: -124
Info: ''
11:
Bounds: x1=12, y1=165, x2=247, y2=183
Type: -120
Info: 'Current Hard Disk for C:'
12:
Bounds: x1=12, y1=184, x2=338, y2=218
Type: -120
Info: ''
13:
Bounds: x1=12, y1=8, x2=260, y2=27
Type: -120
Info: 'Select Hard Disk document for C:'
DITL_160_hdisk getDfile.txt
Items: (14 entries)
0:
Bounds: x1=259, y1=138, x2=339, y2=156
Type: 4
Info: 'Select'
1:
Bounds: x1=259, y1=193, x2=339, y2=211
Type: 4
Info: 'New…'
2:
Bounds: x1=259, y1=166, x2=339, y2=184
Type: 4
Info: 'Cancel'
3:
Bounds: x1=246, y1=28, x2=350, y2=48
Type: -128
Info: ''
4:
Bounds: x1=259, y1=60, x2=339, y2=78
Type: 4
Info: 'Eject'
5:
Bounds: x1=259, y1=87, x2=339, y2=105
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=28, x2=230, y2=188
Type: 0
Info: ''
7:
Bounds: x1=229, y1=28, x2=245, y2=188
Type: 0
Info: ''
8:
Bounds: x1=253, y1=121, x2=341, y2=122
Type: -128
Info: ''
9:
Bounds: x1=500, y1=40, x2=600, y2=120
Type: -120
Info: ''
10:
Bounds: x1=259, y1=221, x2=339, y2=239
Type: 4
Info: 'None'
11:
Bounds: x1=12, y1=185, x2=215, y2=204
Type: -120
Info: 'Current Hard Disk for D:'
12:
Bounds: x1=12, y1=204, x2=244, y2=238
Type: -120
Info: ''
13:
Bounds: x1=12, y1=8, x2=260, y2=27
Type: -120
Info: 'Select Hard Disk document for D:'
DITL_153_ports putfile.txt
Items: (10 entries)
0:
Bounds: x1=218, y1=132, x2=288, y2=150
Type: 4
Info: 'Save'
1:
Bounds: x1=218, y1=160, x2=288, y2=178
Type: 4
Info: 'Cancel'
2:
Bounds: x1=14, y1=177, x2=197, y2=193
Type: -120
Info: 'Save serial output in:'
3:
Bounds: x1=198, y1=29, x2=302, y2=49
Type: -128
Info: ''
4:
Bounds: x1=218, y1=56, x2=288, y2=74
Type: 4
Info: 'Eject'
5:
Bounds: x1=218, y1=82, x2=288, y2=100
Type: 4
Info: 'Drive'
6:
Bounds: x1=17, y1=196, x2=194, y2=212
Type: 16
Info: ''
7:
Bounds: x1=14, y1=29, x2=197, y2=175
Type: -128
Info: ''
8:
Bounds: x1=218, y1=188, x2=288, y2=206
Type: 4
Info: 'None'
9:
Bounds: x1=209, y1=116, x2=297, y2=117
Type: -128
Info: ''
DITL_152_fsa putfile.txt
Items: (15 entries)
0:
Bounds: x1=206, y1=138, x2=300, y2=158
Type: 4
Info: 'Open Folder'
1:
Bounds: x1=206, y1=230, x2=300, y2=250
Type: 4
Info: 'Cancel'
2:
Bounds: x1=331, y1=52, x2=514, y2=68
Type: -120
Info: 'dummy prompt'
3:
Bounds: x1=198, y1=46, x2=302, y2=66
Type: -128
Info: ''
4:
Bounds: x1=206, y1=70, x2=300, y2=90
Type: 4
Info: 'Eject'
5:
Bounds: x1=206, y1=97, x2=300, y2=117
Type: 4
Info: 'Drive'
6:
Bounds: x1=334, y1=73, x2=511, y2=89
Type: -112
Info: 'dummy name'
7:
Bounds: x1=14, y1=46, x2=193, y2=208
Type: -128
Info: ''
8:
Bounds: x1=206, y1=167, x2=300, y2=187
Type: 4
Info: 'Select'
9:
Bounds: x1=198, y1=46, x2=302, y2=66
Type: -128
Info: ''
10:
Bounds: x1=198, y1=46, x2=302, y2=66
Type: -128
Info: ''
11:
Bounds: x1=14, y1=219, x2=179, y2=254
Type: -120
Info: 'Current Mac volume or folder for Drive E:'
12:
Bounds: x1=14, y1=256, x2=304, y2=270
Type: -120
Info: ''
13:
Bounds: x1=198, y1=198, x2=308, y2=218
Type: 4
Info: 'Set File Types…'
14:
Bounds: x1=12, y1=7, x2=290, y2=24
Type: -120
Info: 'Select Mac folder for Network Drive E:'
DITL_151_Create hdisk.txt
Items: (19 entries)
0:
Bounds: x1=218, y1=132, x2=288, y2=150
Type: 4
Info: 'Create'
1:
Bounds: x1=218, y1=160, x2=288, y2=178
Type: 4
Info: 'Cancel'
2:
Bounds: x1=14, y1=153, x2=197, y2=169
Type: -120
Info: 'Create Hard Disk called:'
3:
Bounds: x1=198, y1=29, x2=302, y2=49
Type: -128
Info: ''
4:
Bounds: x1=218, y1=56, x2=288, y2=74
Type: 4
Info: 'Eject'
5:
Bounds: x1=218, y1=82, x2=288, y2=100
Type: 4
Info: 'Drive'
6:
Bounds: x1=17, y1=180, x2=194, y2=194
Type: 16
Info: ''
7:
Bounds: x1=15, y1=29, x2=198, y2=144
Type: -128
Info: ''
8:
Bounds: x1=14, y1=230, x2=95, y2=250
Type: 6
Info: ' 1 Mbyte'
9:
Bounds: x1=14, y1=250, x2=95, y2=270
Type: 6
Info: ' 2 Mbyte'
10:
Bounds: x1=14, y1=270, x2=95, y2=290
Type: 6
Info: ' 3 Mbyte'
11:
Bounds: x1=101, y1=230, x2=185, y2=250
Type: 6
Info: ' 4 Mbyte'
12:
Bounds: x1=101, y1=250, x2=185, y2=270
Type: 6
Info: ' 5 Mbyte'
13:
Bounds: x1=101, y1=270, x2=185, y2=290
Type: 6
Info: '10 Mbyte'
14:
Bounds: x1=196, y1=230, x2=275, y2=250
Type: 6
Info: '15 Mbyte'
15:
Bounds: x1=196, y1=250, x2=275, y2=270
Type: 6
Info: '20 Mbyte'
16:
Bounds: x1=196, y1=270, x2=275, y2=290
Type: 6
Info: '30 Mbyte'
17:
Bounds: x1=15, y1=209, x2=115, y2=225
Type: -120
Info: 'Hard Disk Size:'
18:
Bounds: x1=208, y1=115, x2=301, y2=116
Type: -128
Info: ''
DITL_133_fsa types.txt
Items: (8 entries)
0:
Bounds: x1=236, y1=35, x2=296, y2=55
Type: 4
Info: 'OK'
1:
Bounds: x1=236, y1=62, x2=296, y2=82
Type: 4
Info: 'Cancel'
2:
Bounds: x1=28, y1=30, x2=164, y2=46
Type: 6
Info: 'ask for file type -'
3:
Bounds: x1=28, y1=46, x2=164, y2=62
Type: 6
Info: 'always use type -'
4:
Bounds: x1=28, y1=62, x2=220, y2=78
Type: 6
Info: 'automatically select type'
5:
Bounds: x1=8, y1=6, x2=120, y2=27
Type: -120
Info: 'On file creation:'
6:
Bounds: x1=172, y1=38, x2=214, y2=55
Type: 16
Info: ''
7:
Bounds: x1=120, y1=6, x2=308, y2=27
Type: -120
Info: ''
DITL_132_floppy drives.txt
Items: (18 entries)
0:
Bounds: x1=158, y1=214, x2=228, y2=234
Type: 4
Info: 'Select'
1:
Bounds: x1=286, y1=214, x2=356, y2=234
Type: 4
Info: 'Cancel'
2:
Bounds: x1=52, y1=39, x2=114, y2=53
Type: 6
Info: 'Empty'
3:
Bounds: x1=52, y1=79, x2=142, y2=93
Type: 6
Info: 'Slave PC'
4:
Bounds: x1=52, y1=119, x2=192, y2=133
Type: 6
Info: 'Apple 5.25'
5:
Bounds: x1=215, y1=39, x2=500, y2=53
Type: 6
Info: 'SuperDrive'
6:
Bounds: x1=215, y1=79, x2=500, y2=93
Type: 6
Info: 'SuperDrive'
7:
Bounds: x1=215, y1=119, x2=500, y2=133
Type: 6
Info: 'SuperDrive'
8:
Bounds: x1=215, y1=159, x2=500, y2=173
Type: 6
Info: 'SuperDrive'
9:
Bounds: x1=10, y1=69, x2=42, y2=101
Type: -96
Info: ' Ç'
10:
Bounds: x1=10, y1=110, x2=42, y2=142
Type: -96
Info: ' É'
11:
Bounds: x1=10, y1=10, x2=260, y2=26
Type: -120
Info: 'Select floppy disk device for Drive A:'
12:
Bounds: x1=173, y1=30, x2=205, y2=62
Type: -128
Info: ''
13:
Bounds: x1=173, y1=70, x2=205, y2=102
Type: -128
Info: ''
14:
Bounds: x1=173, y1=110, x2=205, y2=142
Type: -128
Info: ''
15:
Bounds: x1=173, y1=150, x2=205, y2=182
Type: -128
Info: ''
16:
Bounds: x1=10, y1=30, x2=42, y2=62
Type: -96
Info: ' Ñ'
17:
Bounds: x1=32, y1=214, x2=102, y2=234
Type: 4
Info: 'Eject'
DITL_131_print.txt
Items: (10 entries)
0:
Bounds: x1=262, y1=104, x2=327, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=262, y1=142, x2=327, y2=162
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=136, y2=24
Type: 8
Info: 'Start Printing:'
3:
Bounds: x1=24, y1=32, x2=287, y2=49
Type: 5
Info: '30 seconds after last character sent'
4:
Bounds: x1=24, y1=56, x2=240, y2=72
Type: 5
Info: 'when I quit the PC application'
5:
Bounds: x1=8, y1=96, x2=208, y2=112
Type: 8
Info: 'PC application is installed for:'
6:
Bounds: x1=24, y1=120, x2=159, y2=136
Type: 6
Info: 'Epson™ FX-80'
7:
Bounds: x1=24, y1=169, x2=332, y2=186
Type: 6
Info: 'A Postscript™ printer (e.g. LaserWriter™)'
8:
Bounds: x1=37, y1=139, x2=117, y2=155
Type: 5
Info: 'PC Codes'
9:
Bounds: x1=125, y1=139, x2=238, y2=155
Type: 5
Info: 'Codepage 850'
DITL_130_Serial ports.txt
Items: (15 entries)
0:
Bounds: x1=410, y1=50, x2=480, y2=70
Type: 4
Info: 'OK'
1:
Bounds: x1=410, y1=81, x2=480, y2=101
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=40, x2=130, y2=60
Type: 6
Info: 'modem port'
3:
Bounds: x1=20, y1=60, x2=120, y2=80
Type: 6
Info: 'printer port'
4:
Bounds: x1=20, y1=80, x2=70, y2=100
Type: 6
Info: 'file:'
5:
Bounds: x1=70, y1=82, x2=200, y2=102
Type: 8
Info: 'portdest'
6:
Bounds: x1=210, y1=40, x2=320, y2=60
Type: 6
Info: 'modem port'
7:
Bounds: x1=210, y1=60, x2=310, y2=80
Type: 6
Info: 'printer port'
8:
Bounds: x1=210, y1=80, x2=260, y2=100
Type: 6
Info: 'file:'
9:
Bounds: x1=260, y1=82, x2=390, y2=102
Type: 8
Info: 'portdest'
10:
Bounds: x1=10, y1=22, x2=190, y2=40
Type: -120
Info: 'Primary Serial Port (COM1:)'
11:
Bounds: x1=200, y1=22, x2=400, y2=40
Type: -120
Info: 'Secondary Serial Port (COM2:)'
12:
Bounds: x1=54, y1=105, x2=164, y2=125
Type: 5
Info: 'flow control'
13:
Bounds: x1=244, y1=105, x2=354, y2=125
Type: 5
Info: 'flow control'
14:
Bounds: x1=10, y1=2, x2=310, y2=20
Type: -120
Info: 'Select devices for PC serial ports'
DITL_129_help....txt
Items: (5 entries)
0:
Bounds: x1=265, y1=159, x2=335, y2=179
Type: 4
Info: 'Resume'
1:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' Ä'
2:
Bounds: x1=50, y1=20, x2=225, y2=36
Type: -120
Info: 'Additional Information on '
3:
Bounds: x1=225, y1=20, x2=355, y2=36
Type: -120
Info: 'Menu Options '
4:
Bounds: x1=10, y1=50, x2=355, y2=150
Type: -120
Info: 'While this dialog box is present, selecting a menu option will provide more information on its action, rather than performing it. Click on the ‘Resume’ button to return to normal.'